DC7V-35V to DC1.25V-30V LED Driver Charging Constant Current Voltage Step Down Buck Power Supply Module
160
Direct purchase from the factory 
Pago seguro garantizado
Agasallo gratuíto
Política de envío
Política de devoluciónAgasallo gratuíto
Benvido a Roymall, o teu sitio web profesional para a compra de agasallos de tendas de departamento premium. Valoramos e apreciamos moito o teu apoio, e queremos expresar o noso agradecimento engadindo un toque extra de emoción ás túas compras. Cando fas compras connosco, non só podes desfrutar de produtos de alta calidade que melloran o teu estilo de vida, senón que tamén recibirás un agasallo gratuíto exclusivo con cada pedido que realices. Listo para explorar a nosa colección e atopar os teus agasallos perfectos? Navega pola nosa selección de artigos de tendas de departamento premium, fai o teu pedido e espera con ilusión a chegada do teu agasallo gratuíto xunto coa túa compra.Política de envío
Traballaremos duro para entregarche os artigos despois de recibir os teus pedidos e asegurarnos de que chegan con seguridade. Os detalles de entrega proporcionaranse no teu correo electrónico de confirmación.Na maioría dos casos, os pedidos procésanse en 2 días.En circunstancias especiais, atrasarase do seguinte xeito: Cando realices un pedido o sábado, domingo ou días festivos, atrasarase 2 días..Normalmente, necesítanse 5-7 días laborables (de luns a venres) sen verse afectado por atrasos no voo ou outros factores ambientais..Como o noso servizo de envío é mundial, os tempos de entrega dependerán da túa localización, polo que pode tardar uns cantos días e agarda con paciencia se estás en distritos ou países remotos.1. Política de devolución e cambio
Só aceptamos artigos comprados en roymall.com. Se compras aos nosos distribuidores locais ou outros minoristas, non podes devolvelos no noso lado. Os artigos de venda final ou agasallos gratuítos non son aceptables para devolución. Para ser elixible para unha devolución, o teu artigo debe estar sen usar e no mesmo estado no que o recibiches. Tamén debe estar no embalaxe orixinal.Despois de recibir as instrucións de devolución de nós, empaqueta os teus artigos devoltos e deixa o teu paquete na oficina de correos local ou noutro mensaxeiro.Procesaremos o teu artigo de devolución ou cambio dentro de 3-5 días laborables despois de recibilo. O reembolso procesarase e acreditarase automaticamente no teu método de pago orixinal.Non se aceptan devolucións nin cambios se o produto foi producido a medida, incluíndo tamaño personalizado, cor personalizada ou impresión personalizada.Necesitas máis axuda, contacta connosco. service@roymall.com ou Whatsapp: +8619359849471
2.Política de reembolso
Recibirás un reembolso completo ou un 100% de crédito na tenda despois de recibir o paquete devolto e comprobalo. O reembolso procesarase e acreditarase automaticamente no teu método de pago orixinal. Ten en conta que os custos de envío e calquera dereito ou taxa non son reembolsables. Os custos de envío extra non son reembolsables unha vez que o paquete foi enviado. Ti es responsable de pagar estas taxas e non podemos renunciar a elas nin reembolsalas, incluso se o pedido volve a nós.Despois de recibir e confirmar o teu artigo devolto, enviarémosche un correo electrónico para notificarte que recibimos o teu artigo devolto. Tamén notificarémosche a aprobación ou rexeitamento do teu reembolso.Se tes algún problema respecto ao proceso de reembolso, contacta connosco. service@roymall.com ou Whatsapp: +8619359849471
Feature:
This module uses the LM2596 chip, high efficiency (up to 92%), low heat, can be very easily used to above 3A current, in conjunction with the original TI op amp control output current, so the overall output is very stable.
This module uses the original Sanyo low ESR filter capacitor, you can make low ripple voltage to 50mV!
This module uses machine placement, reflow soldering.
This module is an adjustable buck module, the module can be adjusted from the blue adjustable resistor to change the output voltage. Input and output differential pressure is 2V, the minimum can be output 1.23V.
Module indicated IN - (negative input), IN + (positive input), OUT - (negative output), OUT + (positive output), please note must be correct connected, otherwise may cause damage to the module.
Description:
Nature of the module: Non-isolated step-down module
Rectification: Non-synchronous rectification
Input voltage: 7V - 35V
Output voltage: 1.25V - 30V
Output current: Adjustable, 3A (maximum)
Transfer efficiency: 92% (maximum)
Switching frequency: 150KHz
output ripple: 50mV (maximum) 20M Kbps
Load regulation: ±0.5%
Voltage regulation: ±2.5%
Operating temperature: -40°C to +85°C
Dimension: 48 x 23 x 14mm (L x W x H)
Battery charging method:
1. Make sure the battery float voltage and charging current, the module input voltage;
2. Adjustment constant potentiometer, the output voltage is adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjust the constant current potentiometer make the output current reaches a predetermined charge current value;
4. Turn lamp current default is 0.1 times charging current (constant current value), if you need to adjust please adjust the turn lamp current potentiometer; (generally doesn't need adjustment)
5. Adjustment constant potentiometer allows the output voltage reaches the float voltage;
6. Connected to the battery and try to charge.
(1,2,3,4,5 steps are for the module input connected to the power supply, output-load battery is not connected.)
LED constant current driver using method:
1. Make sure that the drive LED operating current and maximum working voltage;
2. Adjustment constant potentiometer, output voltage adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjusting the constant current potentiometer allows the output current reaches a predetermined LED working current;
4. Adjustment constant potentiometer allows the output voltage reaches the maximum operating voltage LED;
5. Connect LED, test machine.
(1,2,3,4 steps are module input connect to the power supply, output-load is not connected LED lights.)
Package included:
1 x Buck module
This module uses the LM2596 chip, high efficiency (up to 92%), low heat, can be very easily used to above 3A current, in conjunction with the original TI op amp control output current, so the overall output is very stable.
This module uses the original Sanyo low ESR filter capacitor, you can make low ripple voltage to 50mV!
This module uses machine placement, reflow soldering.
This module is an adjustable buck module, the module can be adjusted from the blue adjustable resistor to change the output voltage. Input and output differential pressure is 2V, the minimum can be output 1.23V.
Module indicated IN - (negative input), IN + (positive input), OUT - (negative output), OUT + (positive output), please note must be correct connected, otherwise may cause damage to the module.
Description:
Nature of the module: Non-isolated step-down module
Rectification: Non-synchronous rectification
Input voltage: 7V - 35V
Output voltage: 1.25V - 30V
Output current: Adjustable, 3A (maximum)
Transfer efficiency: 92% (maximum)
Switching frequency: 150KHz
output ripple: 50mV (maximum) 20M Kbps
Load regulation: ±0.5%
Voltage regulation: ±2.5%
Operating temperature: -40°C to +85°C
Dimension: 48 x 23 x 14mm (L x W x H)
Battery charging method:
1. Make sure the battery float voltage and charging current, the module input voltage;
2. Adjustment constant potentiometer, the output voltage is adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjust the constant current potentiometer make the output current reaches a predetermined charge current value;
4. Turn lamp current default is 0.1 times charging current (constant current value), if you need to adjust please adjust the turn lamp current potentiometer; (generally doesn't need adjustment)
5. Adjustment constant potentiometer allows the output voltage reaches the float voltage;
6. Connected to the battery and try to charge.
(1,2,3,4,5 steps are for the module input connected to the power supply, output-load battery is not connected.)
LED constant current driver using method:
1. Make sure that the drive LED operating current and maximum working voltage;
2. Adjustment constant potentiometer, output voltage adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjusting the constant current potentiometer allows the output current reaches a predetermined LED working current;
4. Adjustment constant potentiometer allows the output voltage reaches the maximum operating voltage LED;
5. Connect LED, test machine.
(1,2,3,4 steps are module input connect to the power supply, output-load is not connected LED lights.)
Package included:
1 x Buck module
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Electronics Ranking
n
n
n
n
n
n
n
n
n
n
n
n
